Monday, December 23, 2019

American History The Dark Past - 1556 Words

American History: The Dark Past Unique characters, stimulating story plot and surprising endings are some reasons people in literature believe the two novels To Kill a Mockingbird by Harper Lee and Of Mice and Men by John Steinbeck have maintained their long standing positions in American literature. Readers and critics alike spend much time searching for what distinguishes these novels from others. As plain and old these books may seem, their messages are not. To some, the messages of these novels are about the inspiring, exhilarating, and uplifting history of this country. But in this case, it is the polar opposite. Throughout these novels, racism, sexism, and many other themes are exhibited as the norm for the characters. Readers often forget that these dark aspects of the past are a part of America’s history. Spanning from the start of early civilization, humans have made many mistakes and to stop this vicious cycle, they have to learn from the past by keeping classics like these part of school curricul ums. After the required novels in their English classes, students unanimously agree that classics are overrated and outdated. They claim that the themes exhibited throughout the book create a monotonous tone and plot. However, these are what gives the novels their energy and unique depth. In both Of Mice and Men and To Kill a Mockingbird, the theme of racism is focused on. Racism is a controversial issue for all skin colors and is still prominent in the 21st century.Show MoreRelatedWhat ´s Dark Tourism?1253 Words   |  5 Pagestourism field is dark tourism, also known as black tourism and grief tourism. Dark tourism is a type of tourism where tourists go to places that are related with death and tragedy. Death and tragedy are usually associated with darkness. For this reason, many authors prefer using the word thanatourism, because this term is a neutral term without any emotional meanings. More recently it was suggested that tourists also need reasons to visit a destination of dark t ourism. The main signs of dark locations isRead MoreWhat Is Our Hope For The Future914 Words   |  4 PagesAmerican History: Our Hope for the Future Those who cannot remember the past are condemned to repeat it. That’s a statement that we’ve all pobably heard before. It is true that american history can give us hope for the future while it can also bring to light pessimism and concern us. While there is many horrible things happening in the world today, I think we can all look towards the dark with hope. While the horrible events look as though no good can come from them, the american people can haveRead MoreIs Affirmative Action Fair?1067 Words   |  5 PagesAccording to the Negro Holocaust, The United States has a brutal history of domestic violence, especially the violence committed against Negro citizens. Negro citizens have been victimized by racism, lynching, and beatings due to their inferior status. According to â€Å"Is Affirmative Action Fair?† there have been various practices motivated by racism such as slavery, job discrimination, and segregation. These practices have left African Americans wit h additional â€Å"negro problems† correlating with the colorRead MoreSummary Of Mark Of Oppression 968 Words   |  4 PagesAlthough innumerable numbers of African Americans try to overcome their struggles, according to Perceptions of and Preferences for Skin Color, Black Racial Identity, and Self- esteem Among African Americans, while multitudinous dark-complexioned African Americans view their skin color proudly, others are ambivalent and view their blackness as a â€Å"mark of oppression† (Kardiner Ovesey, 1951). This â€Å"mark of oppression† has come from the way African-Americans have been treated as a whole and throughoutRead MoreGerman History Essay1730 Words   |  7 PagesMost would agree that it is valuable to acknowledge history, whether it be through documentation, education, or architectural preservation. However, history can be complex and ugly, stained by war, genocide, and destruction. Therein lies a philosophical controversy: should these historical â€Å"stains† be acknowledged or buried? What role do these ugly histories have in the development of a society? Within the last century, no nation has been forced to confront these questions on the same scale thatRead MoreJourney Of Journey1383 Words   |  6 Pageshorse in the woods that belonged to someone else to watch the snow fall through the trees before his long journey ahead of him. While we are busy with our everyday life we forget to stop and look around. For example, Frost says â€Å"The woods are lovely, dark and deep. But I have promises to keep. And miles to go before I sleep† (Schilb, 1300). People sometimes are too busy with getting their jobs done and fail to notice the beauty that the world has to offer. In the second poem, â€Å"The Road Not Taken† theRead MoreThe Period Of Rome And Greece1467 Words   |  6 PagesAges† also defined as the Dark Ages. Dark Ages denote customary light-versus-darkness; the contrast to darkne ss reveals a period void of light, a period of intellectual darkness. Some segments of Europe during this period lacked sufficient historical and written archive records. The conception of the Dark Age originated with the Italian scholar, poet, and Renaissance humanist David Petrarch (Francesco Petrarca) in the 1330s. Patriarch saw the post-Roman periods as dark in paralleled to the clevernessRead MoreLabeling Theory And Its Effects On The United States Essay1625 Words   |  7 Pageseight was selected because they were young, low-level and not violent. They were offered a deal. If they agreed to enter a program of education and work at a legal job, they wouldn’t face charges. The program lasted a year with the eight African American males with Prosser and Foster at their side for guidance. They helped them get jobs from part-time jobs to part-time jobs, and even took them back and forth to work. Also, they worked with them as they studied for their high school diplomas. At firstRead MoreThe Exploitation Of Africans And Members Of The African Diaspora1635 Words   |  7 PagesThroughout American history, the exploitation of Africans and members of the African diaspora continues as a controversial topic among cultural critics because of America’s unwillingness to accept the flaws of its past. Discussions on whether the sentiments of slavery still impact people of the African diaspora are intricate. Furthermore, the marginalization of people of the African Diaspora continues to complexify the issue. Social concepts in modern America such as education, nationhood, fact makingRead MoreAnalysis Of The Book Darwin s Plantation 1365 Words   |  6 Pagesthings about the African American race, however that information was never released. These ideas and experiments continued to spread, though many fired back with the ideas of God. The book continuously recognizes the fact that racism isn’t something that can be stopped by a campaign or a passed law- it is only something that can be stopped by each person individually- especially one who has the Holy Spirit alive within them. After viewing how the African Americans were treated, the book then

Sunday, December 15, 2019

Women in the Workplace Free Essays

From running for president, making up over half of the workforce, managing some of the world’s most successful companies, and earning almost 60% of university degrees in America and Europe, women’s presence in the workforce is more prominent today than ever. This â€Å"economic empowerment of women† is changing the workplace, as we know it. Only 20 years ago, women were viewed as only capable of unskilled jobs and were assumed to place marriage and children before having a career. We will write a custom essay sample on Women in the Workplace or any similar topic only for you Order Now In today’s society, women have more opportunities to have power over their lives and chose their career path. In today’s global economy, every country should be utilizing the talents of their women in their workforce. For many countries, this progress has not been the same as America. For example, in Italy and Japan men employment rates are more than 20 percentage points higher and women’s employment rate is still below 50%. On average, women still earn significantly less than men and are a minority in top management. Remarkable Social Change without Conflict The Economist found three surprising results from the increase of women in the workforce: the lack of privilege felt from women about their new opportunities, unmet expectations of women’s role in the workforce and the lack of resistance from society, especially men. The lack of celebration from women is believed to be because of the economic necessity of women to work. Today, most households are two-income and women have little choice as to whether they want to work or not. Their contribution is the only way for many households to maintain their standard of living after having children. Also, many young women take this opportunity to work for granted, because they have grown up in a welcoming environment where women were always part of the workforce. Although women are encouraged to enter the work force, only 2% are managers and less than 13% are board members. Men dominate top management. America and Britain’s average full-time, female workers earn only about 80% as much as their male counterpart. Finally, most Americans are comfortable with women in the workforce with 9 out of 10 men are even comfortable with women earning more than they do. The minimal resistance to this social trend, especially by men, has allowed it to adapt rapidly and with little conflict. Contributing Factors to this Social Change A major explanation for increased women in the workforce is the large amount of women who are university graduates and professional workers. Growth of higher education has increased women’s value in the job market and has caused a shift in the woman role model as professional women, not just homemakers. According to The Economist, in 1963, 62% of college-educated women were in the workforce whereas 46% of those who had a high school diploma. Today, 80% of American women with a college education are in the workforce in contrast to 67% with a high school diploma and 47% without one. Women are also educated in more â€Å"marketable subjects† such as business and management. In 1966, 40% of women obtained a degree in education and 2% in business and management. Where as today, 12% obtain degrees in education and 50% obtain degrees in business and management. Engineering and computer science are one of the few areas women are lagging in. Politics have had a major effect on this revolution. Feminists have made domestic slavery unacceptable. Feminists have also strongly criticize discrimination toward women in the work place. We’ve even seen equal-rights acts passed in order to assure an equal playing ground in the work force for men and women of all ethnicities. Economic and technological forces have also played a role in the empowerment of women in the workforce. There has been a growing demand for women in the workforce. When strength was required to work, men had the advantage. The growth in the service sector and decline in the manufacturing sector has made brainpower more of a demand in the work force. This puts men and women on a more equal playing ground. Lastly, women have been more than willing and able to meet the demands of being in the workforce. Many factors play a role in this. For example, traditional cleaning is done easier and quicker than before. The contraceptive pill has allowed women to get married late, increased their ability to invest in their careers, and allowed them to finish schooling instead of taking breaks due to childbirth. Major Challenges Faced with a Woman Workforce Two major challenges have occurred with the increase of women in the workforce. First, women continue to be under-represented in top management, with only 2% in America and 5% in Britain, and are paid considerably less than men. Secondly, it is very demanding for women to manage both their career and their family. In America, 74% of parents believe they don’t spend enough time with their children because they are constantly juggling their work and home life. In two-parent working households, childcare consumes a large proportion of the budget, but having one parent stay at home could result in much lower income for family expenses. Therefore, having only one income is not an option. Poor households are affected the most because of the large amount of poor mothers in the workforce and the unwillingness to spend public funds on childcare for these mothers. Career Woman vs. Motherhood As women become more and more prevalent in the workforce, they find themselves choosing between being successful in their careers and being a stay-at-home mother. Many women are in challenging careers in their 20s, leave in their 30s to have children and find it hard to return after their leave of absence. Of all the women who left work to have children, 93% of women wanted to return to work, but only 74% returned to work, only 40% returning full-time. Also, many women find the role of motherhood damaging to their professional career. Those women in corporate America who don’t have children earn as much as men, where as mothers earn less and single mothers even less. The Economist explains that the â€Å"cost of motherhood† is great for women in professional careers because wages increase abruptly and schedules are very demanding. Many times executives are expected to work in numerous departments and travel often. Therefore, the gap ii pay and positions between men and women may be because women are measured exactly the same as men, not because of discrimination or unfair treatment. This trend is producing high cost on individuals and society because many professional women are eliminating motherhood altogether or are forced into the fertility industry when they do decide to have children. Solutions for these Challenges For the most part, people believe that this trend will handle itself. Others argue that government intervention such as women quotas, state-funded daycares, extended paid maternity leave, â€Å"parent’s salary,† earlier preschool education, or the elimination of part-time jobs is necessary to fix these problems. The Economist discusses how these different alternatives have been used in other countries with success, but there is not enough evidence to show these measures have created the success. In fact, America has had many of the same results as these countries without taking such drastic measures. There are less dramatic steps that the American government can take to improve and ease women into the workforce. These include alterations such as longer school days and shorter summer holidays or closing midday. The struggle with fixing problems from â€Å"the social consequences of women’s economic empowerment† will continue for decades to come. The Future of Women in the Workforce This trend of women in the workforce is likely to continue to grow and is apparent throughout all aspects of business. The Economist predicts that by 2011, there will be 2. 6 million more female than male university students. The Bureau of Labor Statistics states that women already compose more than 2/3 of employment in 10 of the 15 job categories today. Many women are also opening their own business, doubling that of men in the last 10 years. Women will also benefit from the â€Å"war for talent† because of the ageing workforce and need for skill-dependent workers. Many firms are dividing hours differently such as judging hours annually instead of weekly, allowing them to come in early or late, allowing Fridays off as long as hours are made up, and even allowing husbands and wives to share jobs. The corporate world is even making adjustments to encourage women into the workforce and help with the juggle of raising children and working such as rethinking promotional practices and sustain communication with mothers who are away from work due to their children, allowing them to work from home, or offering flexible scheduling. With the advancement of technology – Internet, e-mail, and conferencing – redesigning the workplace is much more possible. How to cite Women in the Workplace, Essay examples

Saturday, December 7, 2019

Narrator Description Essay Example For Students

Narrator Description Essay What is narrator? Narrator is the voice the author creates to tell the story. The possible ways of telling a story are many, and more than one way can beworked into a single story. Conventionally, the various narrators thatstorytellers draw upon can be grouped into four broad groups: the third-personnarrator, the first-person narrator, the omniscient narrator and the witnessnarrator. After reading William Faulkners A Rose For Emily ,EdoraWeltys A Worn Path, Richard Wrights The Man Who Was Almost AMan and Katherine Anne Porters The Jilting of Granny Weatherall,I want to discuss what type of the narrative voice the four writers create intheir own stories. A witness narrator is who tells only what they see or hearthrough their perspectives. For example, in William Faulkners A Rose forEmily which is about an insane woman who kills her man and sleeps with thedead man for ten years, I can find that there is an example of witness narrator. The author, William Faulkner, uses the Jefferson town people as witness tocreate the towns view about Emily. After the town noticed there was a stinkysmell from Miss Grierson house , they asked Judge Stevens to send her wordto stop it( Faulkner,337). The town people discussed about the stinkysmell from Emily s house, they were the observers. A first-person narrator iswhen the narrator speaks using I or We pronouns. We cansee such first-person narrator in both A Rose For Emily and The Man Who Was Almost A Man. Faulkner uses the town people as observersin A Rose For Emily but his we, though plural and representative ifthe towns view of Emily, is definitely a first-person narrator. Just as in thearticle where it says We did not say she was crazy then. We believed shehad to do that. We remembered all the young men her father driven away, and weknew(338).

Saturday, November 30, 2019

Pili de-Shelling Machine(Unfinished) Essay Example

Pili de-Shelling Machine(Unfinished) Essay Chapter 1 THE PROBLEM Introduction Our country is tropical in nature and because of this, planting pili trees become a suitable ground to grow considering the condition of soil, warm temperatures and well distributed rainfall. Specifically, the Bicol region has these kind characteristics of climates which mean that the region can produce and processes higher quantity of pili nuts. Pili are one of the economically important trees that deserve attention not only from farmers but also from our government. According to Hamilton (2008) pili nut has the potential to become a major nut crop so it needs an improvement and attention especially in terms of vegetative propagation, ecological and cultural requirements of pili as a commercial crop and also for the mechanization for commercial processing. Moreover, the current status of the pili is equivalent to the macadamia that is why pili nut has a great potential to develop into a major industry. Removing pili kernel on its shell is one problem that farmers encounter in producing high quality of kernel. Manual operation using bolo is time consuming and sometimes it cannot guarantee to produce high quality kernel because this method can damage essential parts of a kernel. As time goes by, there are many machines that have been invented in order to help people to make their work easier. There are even machines that were invented for pili shelling however, none of these have the quality of being economically friendly especially to the small-scale farmers who are working in the Philippines. We will write a custom essay sample on Pili de-Shelling Machine(Unfinished) specifically for you for only $16.38 $13.9/page Order now We will write a custom essay sample on Pili de-Shelling Machine(Unfinished) specifically for you FOR ONLY $16.38 $13.9/page Hire Writer We will write a custom essay sample on Pili de-Shelling Machine(Unfinished) specifically for you FOR ONLY $16.38 $13.9/page Hire Writer This idea gives the researchers a motivation to develop a machine that can produce more and high quality pili kernel at low cost, easy to operate and practical for small-scale farmers and sellers. The machine that proposes by the researchers is based on the theory of Isaac Newton which is the law of motion. In this theory it says that every action has an equal and opposite reaction that’s why the researchers use a weighted block as the source of force so that it can crack the pili shell. The researchers was also designed the special tray that is suitable to sizes of pili which is ranging of 4 to 7 cm long, 2. 3 to 3. 8 cm in diameter. This special tray has also blade at the bottom and upper part so that it can assure to crack the pili shell when the weighted block was dropped. This machine also composed of other parts like rope, pulley and stopper. The purpose of pili de-shelling machine especially to the small scale farmers and sellers is to produce pili kernel without using fuel or electricity to operate the machine. As of now the world was suffering to the decreasing source of energy especially fuel, that’s why we need to think another solution to do the same work without consuming a fuel. Pili de-shelling machine was designed in order to help small scale farmers but also the world especially our nature to control the decreasing source of energy. Statement of the Problem This project aims to help pili farmers and sellers in their de-shelling operation of pili nuts. The purpose of this study is to develop a pili de-shelling machine that can produce good quality pili kernels with easy operation, it could be economical and in a short period of time. The study will be conducted to determine the efficiency and probably economic viability of the proposed fabricated pili de-shelling machine in comparison with other existing pili crackers. Specifically, this will answer the following questions: 1. What is the property of pili de-shelling machine in terms of: a. cracking capacity; b. kernel recovery; and c. gender friendliness 2. What is the economic viability of the pili de-shelling machine in comparison with the other existing pili crackers? 3. What possible improvement can be adopted to enhance the capability of the proposed pili de-shelling machine? Assumption of the Study This study was anchored on the following assumptions: 1. The fabricated pili de-shelling machine was efficient in terms of cracking capacity and kernel recovery. Also, it was gender friendly that could a woman can operate the machine. 2. The proposed machine is probably economically practical especially for small-scale farmers and sellers. 3. Possible improvement of the proposed pili de-shelling machine was to include a 1 horse power electric motor to improve its speed and cracking capacity. Importance of the Study This study has highly importance to the following: Farmers and sellers. The result of the study can provide an additional income, because if there is an advance technology for producing pili kernel, the demand of buying nut to the farmers and sellers would increase enabling them to develop their own micro-enterprise to sell pili product at prices they set. Farmers are able to sell pili not as fruit but as kernel at a high price, sellers as well. Department of Agriculture. With the information about the mechanization process, they can endorse it to the farmers of pili and they can profit in making contract to the farmers in using the machine. The farmers and the Department of Agriculture can divide the profit according to the percentage they agreed. The researchers, themselves. The findings of the study will help the present researchers especially in understanding engineering principles involved in the mechanical function of the pili de-shelling machine. Future Researchers. The result of this research may provide future researchers with the facts needed in the preparation of development plans. Investigation on topics related to development programs may find a new horizon of interest from this study. Scope and Delimitation of the Study This research study will focus on the efficient and it could be economy of the fabricated pili de-shelling machine that the researchers proposes. The step by step process on how it operates and the process of production of quality kernels will be observed from the study. Also, the study will conduct tests to show if the proposed fabricated pili de-shelling is comparable or can surpass the manual pili de-shelling operation. The researchers limit their study according to the efficiency and probably economical value of the proposed machine in producing quality pili kernels. The researchers did not include in their study the selection and germination of the pili nuts. Also they did not include the process of separation of the pulp to the nuts, because a pili nut that is used in the study was the dried and the pulp was already removed. Likewise, the scope of the study is limited on the small-scale farmers and sellers in Daet, Camarines Norte which will randomly be selected according to the nature of their work. These farmers and sellers will be limited to those who are active in pili farming and selling. Definition of Terms The following terms were defined contextual and operationally to be able to provide the readers with enough understanding of the present study and to be able to avoid interpretation other than what the researchers wish to imply: Case – a covering box or sheath. It is designed for pili de-shelling to assure the cracking ability of the machine. Pili – is the regional commodity of Bicol which is the purpose of the study to be process. Pili De-shelling – it is a machine that the purpose is to crack the pili shell by using weighted block. Rope – a thick twisted cord of fibers or wires. It is use as a connector to pull and hold the weighted block in this machine. Weighted block – is a solid piece of wood or stone. It is the punching part of the machine or serves as the source of force that would crack the pili. Notes Richard A. Hamilton, Planting Pili Trees: An Economical Value for the Philippines. http://en. wikipedia. org/wiki/Pili_nut, 2008. Encyclopedia American, Groiler International Inc. , United State of America, p. 3 The New Lexicon Webster Dictionary Vol. 2, Lexicon Publication Inc. , United State Of America, p. 762 Chapter 2 REVIEW OF RELATED LITERATURE AND STUDIES This chapter presents the review of related literature and studies which were gathered from books and other references including the internet in order to shed lights on areas that need enrichment and to give readers proper background of the present study being conducted. Included in this chapter is the synthesis of the state-of-the-art, theoretical and conceptual framework of the study. Related Literature The Pili nut (Canariumovatum), one of 600 species in the family Burseraceae, is native to the Philippines and is abundant and wild in the Bicol Region particularly in Sorsogon, and in parts of Visayas and Mindanao. Trees of Canariumovatum are attractive symmetrically shaped evergreens, averaging 20 m tall with resinous wood and resistance to strong wind. C. ovatum is dioecious, with flowers borne on cymose inflorescence at the leaf axils of young shoots. As in papaya and rambutan, functional hermaphrodites exist in pili. Pollination is by insects. Flowering of pili is frequent and fruits ripen through a prolonged period of time. The ovary contains three locules, each with two ovules, most of the time only one ovule develops (Chandler 1958). (en. wikipedia. org) Fruit is a drupe, 4 to 7 cm long, 2. 3 to 3. cm in diameter, and weight 15. 7 to 45. 7 g. The skin (exocarp) is smooth, thin, shiny, and turns purplish black as the fruit ripens. Much of the kernel weight is made up of the cotyledons, which are about 4. 1 to 16. 6% of the whole fruit; it is composed of approximately 8% carbohydrate, 11. 5 to 13. 9% protein, and 70% fat. (www. hort. purdue. edu) Pili nut kernel is the most important produ ct. When raw, it resembles the flavor of roasted pumpkin seed, and when roasted, its mild, nutty flavor and tender-crispy texture is superior to that of the almond. Pili kernel is also used in chocolate, icecream, and baked goods. The edible light-yellow color oil from the kernel is comparable in quality to that of olive oil, containing 59. 6% oleic glycerides and 38. 2% palmitic glycerides. The largest buyers of pili nuts are in Hong Kong and Taiwan, the kernel is one of the major ingredients in one type of the famous Chinese festive desserts known as the moon cake. (www. hort. purdue. edu en. wikipedia. org) From Christian B. de Guzman, the Philippines is the only country that produces and processes pili in commercial quantity (Coronel, 1978) and has the monopoly of processed pili in the foreign market. Bicol Region is known for its pili candies and confectioneries which are sold in different product forms and in various packaging containers. These products are exported to Australia, Guam, Canada, Japan, Hongkong, China, UK, Korea, Singapore, Hawaii, Germany, France and the United States. (www. pinoybisnes. com) Pili nut is a minor crop produced only in the Philippines. The bulk of the raw nuts are supplied from wild stands in the mountains around Sorsogon, Albay and Camarines Sur in the Bicol region. Pili nut has the potential to become a major nut crop. Improvement of nd knowledge in efficient vegetative propagation, ecological and cultural requirements of pili as a commercial crop, and the mechanization for commercial processing are needed. Related Study In the study of Ojolo and Ogunsina (2009), they developed a prototype machine to crack roasted cashew nuts. It is a box like machine that has a hinged and spring-loaded mild steel cracking lid with grooves to hold a cast aluminum feeding tray which has machined to hold 25 nuts at a time. The nuts get cracked by the impact of the lid against the feeding tray. The lid provides for a minimum clearance from the feeding ray on which nuts are preloaded; this prevents the applied force from being in excess of the required cracking force. The machine was tested with various cashew nut sizes and placement orientations. The percentage of whole kernels produce was 66. 66%. The capacity of the machine was estimated to be about 18. 3 kg/hr. Another study is headed by Engr. Arnulfo P. Malinis (2009), it is entitled â€Å"Pili Nut Cracker Goes High-tech†. The Bicol University college of Agriculture and Forestry (BUCAF) in collaborator with the Department of Agriculture-Bureau of Postharvest Research and Extension (DA-BPRE), Tropics Agro-Industries (KOLBI) and DA-Regional Field Unit (RFU) 5 developed the latest mechanical pili nut cracker because of the need for appropriate tools and equipment in processing pili nut. The prototype was consisted of six-blade cracker powered by a 1 Hp electric motor. The motor’s energy consumption is 0. 41 kW-hr. The machine consists of fine major parts: the cracking unit, conveying unit, stand/frame, transmission, and prime mover. The prototype was tested using three major parameters: cracking capacity, the cracking efficiency and economic viability. Technology verification of the prototype showed that on the average, it can crack 204 pieces of pili nut in a minute (117 kg/hr) with a cracking efficiency averaging 93% with 89% whole kernel recovery. It is one-man operated machine that could crack bags of dried pili nuts. For eight hours a day, the simple machine could crack 16 bags of dried nuts. To produce the machine an outlay amounting to 40,000 php is needed and they guaranteed that the return of investment is 53% after more than a year of use. Synthesis of the State-of-the-Art The development of the mechanical pili nut cracker is somehow similar to the present study since the researchers aimed to make improvement as to create a possibility of including a motor powered pili de-shilling machine for future research. However, they differ especially in terms of capability and speed, the only advantage of the present study is that: because of being simple of the propose machine, it is easy to carry for a farmer bringing to his farm besides of a mountain than to bring the mechanical pili nut cracker at here. It is more comparable to bring a one especially when you home is far from the place where your pili trees is planted. Also, from your farm you can sell your pili nuts at the price that you want and making the most of the benefits of it is in you because you’re brought pili are all kernels than if you brought pili with shells, after at home, you will de-shell it or you will sell it at a low price. The development of a C ashew Nut Cracking Device is posed similarities in part that the present study is also use a tray for the nuts are hold. They both use the impact force for the cracking of the shells of the nuts. But they differ on the method to make the nuts cracked. Instead of using hinged and spring-loaded mild steel cracking lid, the researchers using in their machine a weighted blocked that is hang on the pulleys. The cashew cracking device is having grooves to hold 25 nuts at a time while the pili de-shelling machine is fabricated a beehive-like tray to hold 17 pili nuts at a time. Cashew nuts get cracked by the impact of the lid against the feeding tray, however pili nuts get crack by the impact of the loosened weighted block at the upper blade which is have direct contact to the shell and the bounce back impact to the lower blade that is also with direct contact to the shell. In cashew cracking device, the lid provides for a minimum clearance from the feeding tray on which nuts are preloaded to prevent the applied force from being excess of the required cracking force. In pili de-shelling machine, it provides a stopper at the both side of the metal plate where the upper and lower blades are attached for it does not excess on the required cut deep needed. Cashew cracking device was tested with various cashew nut and placement orientations, throughout the pili nut will be test with various pili nut sizes but instead of placement orientation, another test is getting how much weight of the weighted block must be needed to crack all pili nuts in the beehive-like tray. Theoretical Framework This study anchored to the law of Isaac Newton, the Third Law of Newton’s Theory. It state that ‘for every action there is an equal and opposite re-action’. The researchers use this theory in respect on the process of cracking the pili shell. Because of being brittle of pili shell, the researchers themselves conclude that it needs only a little amount of force to crack the shell. In relevant with the theory, since the force is going down because of the blowing of the weighted bar, the researchers put a blade under the tray suite in every hole where pili are placed. If the weighted block is blow down it produce impact and the big pili will crack surely but for the small pili, the under blade is designed. For if the upper blade cannot reached the shell of the small pili, the impact of the block will help to crack the shell because it have a another blade under the tray. Pili Nuts Third Law of Newton’s Theory Or The Third Law of Motion Pili De-Shelling Machine Figure 1. Theoretical Paradigm Conceptual Framework The conceptual framework of this study was based on the system concept. A system consists of three elements, the input, the process and the output. The input, which is actually the load of the system, consists of all things that enter the system. In this study, the input refers to the pili nuts, which is the main objective of this study to be process and the machine if it is more efficient than to the existing. The process which study, the process refers to research method to be used. The tools in gathering data and procedures of interpretation are also written. The output will be the result of the study after analyzing the data related to the problem under study. The summary reports about the application of the propose principles, if it is more efficient or not to the existing. PROCESS Application of the propose principle to the machine to be actualize its process and gathering data to show if it is more efficient OUTPUT Efficient and economical pili de-shelling machine INPUT Pili de-shelling machine FEEDBACK Figure 2. Conceptual Paradigm Notes Francis T. Zee, Pili Nut. http://www. hort. purdue. edu/newcrop/cropfactsheets/pilinut. html, 2005 Richard A. Hamilton, Planting Pili Trees: An Economical Value for the Philippines. http://en. wikipedia. org/wiki/Pili_nut, 2008. Christmas B. De Guzman, Pili Nuts and It’s Uses, http://www. pinoybisnes. om/agri-business/pili-nuts-and-its-uses. July, 2010 Rita T. Dela Cruz and ARnulfo Malinis, Pili nut cracker goes high-tech. http://blog. agriculture. ph/pili-nut-cracker-goes-high-tech. html, March 03, 2009 S. J. Ojolo and B. S. Ogunsina, Development of a Cashew Nut Cracking Device,http://www. emeraldinsight. com/journals. htm? articleid=1876508show=html, Febraury,2009 Chapter 3 RESEARCH METHOD AND PROCEDURES This chapte r presents the research methods and procedures that was utilized in the study. The step by step process of development was the highlight of this chapter. Also discussed was the scientific principles behind the development of the pili de-shelling machine. Methodology The researchers will be using experimental method on a basis of actual values of weight, dimensions or sizes of parts needed for constructing the machine. We will do some trials to test the weight of the block and even the velocity of the block distance per unit time of travel. The primary function of this test is to assure that the entire pili nut in the case will crack. The cracking ability of the machine will depend in the case, composes of two parts, the upper and the lower part. The lower part, there is a tray where the pili nut put in and the lower blade. The upper part has a cover to prevent the movement of the pili nut and where the upper blade attached. Other mechanisms that are part of the case are the stopper, the base, the poles and the upper brazed. In the pulling of the rope, the force you will exert is not too large. It is in the range of 8. 8 to 17. 6 lb more or less. It’s like you pulling a toy car weighing 4 to 8 kg. It is easy to pull because it have a wheels same as this machine. We connect pulley to resist the friction while in operation. With it comes to actual constructing of machine we will make it adjustable. For example, the weighted block can be adjustable by adding another weight to satisfy the required weights needed. The stopper is also adjustable by little-by-little subtracting a height to make get the appropriate height needed. Research Procedure The researchers use a questionnaire to gathered data to answer the problem whether the machine is gender friendly or not and to get the idea of the respondents for the specified improvements given by the researchers. The esearchers selected 10 farmers or sellers randomly who are active in pili farming or selling in Daet, Camarines Norte. The researchers use a time frame to make the research possible. But because of some conflictions to the other subjects of the researchers, they made more adjustments to their time frame. The researchers also use to pattern some of their paper works on the undergraduate thesis that are place at the school library. Assembly and Const ructions This part deals the procedure on how the machine works and operates. 1. The beehive-like tray Here, where pili nuts are place. Because of being like of the beehive holes, the pili is easily shoot and place when you droop it of your hands. 2. The amazing case Here, the upper and lower blades are located. In this part, the beehive-like tray with pili nuts is inserted between the two blades. The upper blade is adjustable for the variation of pili nuts height while the lower blade is fixed on the base. 3. The base, poles and the upper braze The poles are attached to the base at the lower part and the upper braze is on top of it. In the base, the lower blade of the amazing case is in fixed and the upper braze, where the pulley is in place. The poles signify for the approaching height of the weighted block when it drops. 4. The pulley and the rope The rope is attach to the weighted block while the pulley made the pulling of the rope easy for the weighted block goes to it’s initial position. 5. The weighted block It gives the biggest contribution on the machine. The force that can get from falling of it from its initial position serves as to push the upper blade and bounce back by the lower blade. That is why, the pili nuts inserted in between of it where nothing to go but to crack. Statistics Tools CHAPTER 4 Pili De-Shelling Machine For Small Scale Farmers This chapter present and interprets the data gathered by the researchers about getting the efficiency of the Pili De-Shelling Machine. The details are focused on calculating the cracking capacity, the kernel recovery and if the machine is gender friendly, including the economic viability of the machine in compare to the existing and improvements that can be adopted to enhance the machine efficiency. Preliminary test were carried out with dry-rousted pili nuts to determine the performance of the machine. Table 1 and 2 indicates on how to measure the said performance. By using the tables, it will help to give a scientific discussion on how to treat the data. I. The efficiency rate of pili de-shelling machine Table 1: Cracking Capacity Sample| Cracked nuts (pcs)| Time of Operation (s)| 1| | | 2| | | 3| | | 5| | | Mean| | | Table 2: Kernel Recovery Sample| Whole Kernel| Broken Kernel| 1| | | 2| | | 3| | | 5| | | Mean| | | Table 3: Gender Friendliness Respondents| Yes| No| 1| | | | | | 3| | | 5| | | 6| | | 7| | | 8| | | 9| | | 10| | | Mean| | | II. Economic Viability III. Possible Improvements CHAPTER 5 Summary, Findings, Conclusions and Recommendations Summary Removing pili kernel on its shell is one problem that farmers encounter in producing high quality of kernel. Manual operation using bolo is time consuming and sometimes it cannot guarantee to produce high quality kernel becaus e this method can damage essential parts of a kernel. As time goes by, there are many machines that have been invented in order to help people to make their work easier. There are even machines that were invented for pili shelling however, none of these have the quality of being economically friendly especially to the small-scale farmers who are working in the Philippines. This idea gives the researchers a motivation to develop a machine that can produce more and high quality pili kernel at low cost, easy to operate and practical for small-scale farmers and sellers. The machine that proposes by the researchers is based on the theory of Isaac Newton which is the law of motion. In this theory it says that every action has an equal and opposite reaction that’s why the researchers use a weighted block as the source of force so that it can crack the pili shell. The researchers was also designed the special tray that is suitable to sizes of pili which is ranging of 4 to 7 cm long, 2. 3 to 3. 8 cm in diameter. This special tray had also blade at the bottom and upper part so that it can assure to crack the pili shell when the weighted block was dropped. This machine also composed of other parts like rope, pulley and stopper. The purpose of pili de-shelling machine especially to the small scale farmers and sellers is to produce pili kernel without using fuel or electricity to operate the machine. As of now the world was suffering to the decreasing source of energy especially fuel, that’s why we need to think another solution to do the same work without consuming a fuel. Pili de-shelling machine was designed in order to help small scale farmers but also the world especially our nature to control the decreasing source of energy. This project aimed to help pili farmers and sellers in their de-shelling operation of pili nuts. The purpose of this study is to develop a pili de-shelling machine that can produce good quality pili kernels with easy operation, it could be economical and in a short period of time. The study was conducted to determine the efficiency and probably economic viability of the proposed fabricated pili de-shelling machine in comparison with other existing pili crackers and sighted some improvements for the machine. The researchers measured the property of pili de-shelling machine in terms of its cracking capacity, kernel recovery and if it was gender friendly. They compare the proposed machine to the existing pili crackers to determine its economic viability. Also, the researchers cited some improvements that could adopted to enhance the capability of the pili de-shelling machine. Findings I. II. III. Conclusions I. II. III. Recommendations I. II. III. IV. Additional Recommendations Curriculum Vitae Personal Data Name : Christian Jess A. Natan Nickname:Nathz Contact No. :09103842029 Address:Pob. I, Basud, Camarines Norte Date of Birth:December 22, 1990 Place of Birth:QMMC, Quezon City Father’s Name:Roberto E. Natan Mother’s Name:Jocelyn A. Natan Religion:Born Again Christian Educational Background Elementary:Mangcamagong Elem. School(S. Y. 2002-2003) Mangcamagong, Basud, Camarines Norte Secondary:Basud National High School(S. Y. 2006-2007) Basud, Camaries Norte Tertiary:Camarines Norte State College(S. Y. 2011-2012) Daet, Camarines Norte Course:Bachelor of Science in Mechanical Engineering Curriculum Vitae Personal Data Name :Edwin T. Bombales Nickname:Edz Contact No. :09463127539 Address:Brgy. Mangga, Sipocot, Camarines Norte Date of Birth:February 07, 1988 Place of Birth:Brgy. Mangga, Sipocot, Camarines Norte Father’s Name:Eduardo T. Bombales Mother’s Name:Beatriz T. Bombales Religion:Roman Catholic Educational Background Elementary:Mangga Elem. School(S. Y. 2000-2001) Brgy. Mangga, Sipocot, Camarines Norte Secondary:Barcelonita Fisheries School(S. Y. 2004-2005) Barcelonita, Cabusau, Camarines Sur Tertiary:Camarines Norte State College(S. Y. 2011-2012) Daet, Camarines Norte Course:Bachelor of Science in Mechanical Engineering Curriculum Vitae Personal Data Name :Karlo Jamie A. Ong Nickname:Kaloy Contact No. :09095699023 Address:p-3, Brgy. Calintaan, Talisay, Camarines Norte Date of Birth:February 12, 1991 Place of Birth:Brgy. 7, Daet, Camarines Norte Father’s Name:James S. Ong Mother’s Name:Rosemarie A. Ong Religion:Roman Catholic Educational Background Elementary:Talisay Elem. School(S. Y. 2000-2001) Talisay, Camarines Norte Secondary:D. Q. Liwag High School(S. Y. 2006-2007) Sto. Domingo, Vinzons, Camarines Norte Tertiary:Camarines Norte State College(S. Y. 2011-2012) Daet, Camarines Norte Course:Bachelor of Science in Mechanical Engineering

Monday, November 25, 2019

Thomas Hardy Quotes From Tess of the dUrberville

Thomas Hardy Quotes From 'Tess of the d'Urberville' Tess of the dUrberville is a tragedy. The novel details the loss of innocence and the ultimate destruction of a young girl. The novel was one of the last novels by Thomas Hardy, who is also famous for Jude the Obscure. Here are a few quotes from Tess of the dUrberville. I dont know; but I think so. They sometimes seem to be like the apples on our stubbard-tree. Most of them splendid and sound - a few blighted.- Thomas Hardy, Tess of the dUrberville, Chapter 4 I wont sell his old body. When we dUrbervilles was knights in the land, we didnt sell our chargers for cats meat. Let em keep their shillings! Heve served me well in his lifetime, and I wont part from him now.- Thomas Hardy, Tess of the dUrberville, Chapter 4 Thus, the thing began. Had she perceived this meetings import she might have asked why she was doomed to be seen and coveted that day by the wrong man, and not by some other man, the right and desired one in all respects...- Thomas Hardy, Tess of the dUrberville, Chapter 5 Out of the frying pan into the fire!- Thomas Hardy, Tess of the dUrberville, Chapter 10 But some might say, where was Tesss guardian Angel? Where was the providence of her simple faith? Perhaps... he was talking, or he was pursuing, or he was in a journey, or he was sleeping and not to be awaked... As Tesss own people down in those retreats are never tired of saying among each other in their fatalistic way: It was to be.- Thomas Hardy, Tess of the dUrberville, Chapter 11 My life looks as if it had been wasted for want of chances! When I see what you know, what you have read, and seen, and thought, I feel what a nothing I am!- Thomas Hardy, Tess of the dUrberville, Chapter 19 I cant bear to let anybody have him but me! Yet it is wrong Tess him, and may kill him when he knows!- Thomas Hardy, Tess of the dUrberville, Chapter 28 Yes; at that dance on the green; but you would not dance with me. O, I hope that is no ill-omen for us now!- Thomas Hardy, Tess of the dUrberville, Chapter 30 you always courting me, and always thinking as much of me as you have done through the past summertime!- Thomas Hardy, Tess of the dUrberville, Chapter 32 You are very good. But it strikes me that there is a want of harmony between your present mood of self-sacrifice and your past mood of self-preservation.- Thomas Hardy, Tess of the dUrberville, Chapter 35 I agree to the conditions, Angel; because you know best what my punishment ought to be; only - only - dont make it more than I can bear!- Thomas Hardy, Tess of the dUrberville, Chapter 37 She would have laid down her life for ee. I could do no more.- Thomas Hardy, Tess of the dUrberville, Chapter 40 You, and those like you, take your fill of pleasure on earth by making the life of such as me bitter and black with sorrow; and then it is a fine thing when you have had enough of that, to think of securing your pleasure in heaven by becoming converted!- Thomas Hardy, Tess of the dUrberville, Chapter 45 How can I pray for you, when I am forbidden to believe that the great Power who moves the world would alter his plans on my account?- Thomas Hardy, Tess of the dUrberville, Chapter 46 You have been the cause of my backsliding, he continued, stretching his arm towards her waist; you should be willing to share it, and leave that mule you call husband forever.- Thomas Hardy, Tess of the dUrberville, Chapter 47 Remember, my lady, I was your master once! I will be your master again. If you are any mans wife you are mine!- Thomas Hardy, Tess of the dUrberville, Chapter 47 O why have you treated me so monstrously, Angel! I do not deserve it. I have thought it all over carefully, and I can never, never forgive you! You know that I did not intend to wrong you - why have you so wronged me? You are cruel, cruel indeed! I will try to forget you. It is all injustice I have received at your hands!- Thomas Hardy, Tess of the dUrberville, Chapter 51 his original Tess had spiritually ceased to recognize the body before him as hers - allowing it to drift, like a corpse upon the current, in a direction disassociated from its living will.- Thomas Hardy, Tess of the dUrberville, Chapter 55 O, you have torn my life all to pieces... made me be what I prayed you in pity not to make me be again!- Thomas Hardy, Tess of the dUrberville, Chapter 56 And the dUrberville knights and dames slept on in their tombs unknowing.- Thomas Hardy, Tess of the dUrberville, Chapter 59

Friday, November 22, 2019

Business of Sorzal Distributors is not a common one

In spite these facts, Sorzal Distributors is a reputable dealer. Its main products include â€Å"authentic southwestern jewelry and pottery, and pre-Columbian artifacts from Peru and Venezuel† (Case Study, n.d.). Gross Sales of the company is about $12 millions and increased at a rate of 20% per year. â€Å"Is that the direction that the market is going?† It is known fact that effective marketing depends upon effective marketing system employed by a company and its strategy. Such factors as globalization of markets, economic integration and increased competition forced Sorzal Distributors to find new ways to compete. It is one of the most important infrastructure requirements, which is essential for the expansion of opportunities and plays an important role in making the competitive positioning. Sorzal Distributors has a chance to â€Å"add $1 million in additional sales† (Case Study, n.d.) contracting with a mass-merchandise department store chain. In spite of great benefits proposed by this contract, the company will be faced with a threat to become a â€Å"replicas retailer† and, probably, will have a negative impact on company’s brand image as a dealer of unique authentic artifacts. It is not an easy decision to make, but before signing the contract the company should answer the question â€Å"Is that the direction that the market is going?† (Case Study, n.d.) Changing Environment Sorzal Distributors operates in a simple and static environment. Firms operating in a relatively simple and static environment can generally rely on management strategies that are based on historical data. The strength of Sorzal Distributors is that it’s goods obtained a very competitive position on the market. The brand has a hard core of loyal supporters. It sells lines of products to satisfy the needs of wide audience through â€Å"specialty shops, firm-sponsored showings, and a few exclusive department stores† (Case Study, n.d.). Another strength is that Sorzal Distributors is an exclusive suppler of South American and African artifacts. Obtaining strong market position, Sorzal Distributors has maintained high-speed growth through product mix and new product lines. The opportunity of the company is the nature of business and loyalty of customers. As it is mentioned: â€Å"consumer tastes are changing from the modern and abstract to the more concrete† like Sorzal’s producrs (Case Study, n.d.). The opportunities of Sorzal include: high potential to growth and profitability of the company; promotion to other divisions; increased revenue from success in national market. In spite opportunities, recent changes threaten the business. Political-legal forces allocate power and provide constraining and protect ­ing laws and regulations. Primarily, political changes in Africa resulted in stricter legislation which prohibits â€Å"exportation of certain artifacts† (Case Study, n.d.). Another threat is increased competition which include the threat of entry by new competitors, the intensity of rivalry among existing competitors, and pressure from substitute products, primarily replicates. Recent years, the number of competitors increased from 5 to 11, and, according to David Olsen, â€Å"bargaining position of Sorzal has eroded† (Case Study, n.d.). The company â€Å"has watched our gross margin slip in recent years due to aggressive competitive bidding by others† (Case Study, n.d.). The weakness of the company is changing economic situation which requires new forms of strategy in order to compete on the limited and narrow market of artifacts. Limited destitution is also a weakness of the company. New Strategy In order to solve these problems and sustain competitive position, Sorzal should accept a competition strategy, instead of a competitive advantage. It is possible to admit that market of artifact is really needed low quality replicates such as produced and sold by Sorzal competitors. Nevertheless, this marketing strategy is not acceptable for Sorzal, which obtains a strong market position as a reputable dealer of   authentic southwestern jewelry and pottery Competition strategy will take place on a price and a non-price basis, and will help Sorzal to compete on the national market. Price competition involves businesses trying to undercut each other’s prices; this will, in turn, be dependent upon their ability to reduce their costs of production. Brand image and loyalty of customers should be the main criteria for Sorzal. This strategy will help to stay on top nationally and sustain competitive position as an exclusive distributor of South American and African artifacts. Marketing strategy based on the non-price competition should take form of branding, advertising, promotion, and additional services to customers (Johnson, Scholes, 1998). An alternative policy for Sorzal is to accept replicates distribution strategy. On the one hand, this strategy will help to add additional sales, but on the other hand, it will have a very negative impact on the company’s reputation. This strategy does not help to compete on the market for a long time, and increase the threat of substitution. The best solution for Sorzal is mass advertising campaign and opening new exclusive stores in order to attracted potential customers.   In relation to minor competitors, Sorzal should provide comparable buyer value but perform the activities more efficiently so as to attain a cost advantage, or perform the activities in a unique way which raises the value to the con ­sumer and thus allows them to command a premium price. If Sorzal follows its present say strategy (as an exclusive distributor of authntic artifacts), it will sustain its dominant position as a top brand, while expanding its operations and becomes a main player in the market. Nevertheless, flexibility is the most important infrastructure requirement, which is essential for the expansion of opportunities, and plays an important role in making and breaking the competitive positioning. References Case Study: Sorzal Distributors. N.d. Available Johnson, G., Scholes, K. Exploring Corporate Strategy. Hemel Hempstead: Prentice Hall. 1998. Business of Sorzal Distributors is not a common one In spite these facts, Sorzal Distributors is a reputable dealer. Its main products include â€Å"authentic southwestern jewelry and pottery, and pre-Columbian artifacts from Peru and Venezuel† (Case Study, n.d.). Gross Sales of the company is about $12 millions and increased at a rate of 20% per year. â€Å"Is that the direction that the market is going?† It is known fact that effective marketing depends upon effective marketing system employed by a company and its strategy. Such factors as globalization of markets, economic integration and increased competition forced Sorzal Distributors to find new ways to compete. It is one of the most important infrastructure requirements, which is essential for the expansion of opportunities and plays an important role in making the competitive positioning. Sorzal Distributors has a chance to â€Å"add $1 million in additional sales† (Case Study, n.d.) contracting with a mass-merchandise department store chain. In spite of great benefits proposed by this contract, the company will be faced with a threat to become a â€Å"replicas retailer† and, probably, will have a negative impact on company’s brand image as a dealer of unique authentic artifacts. It is not an easy decision to make, but before signing the contract the company should answer the question â€Å"Is that the direction that the market is going?† (Case Study, n.d.) Changing Environment Sorzal Distributors operates in a simple and static environment. Firms operating in a relatively simple and static environment can generally rely on management strategies that are based on historical data. The strength of Sorzal Distributors is that it’s goods obtained a very competitive position on the market. The brand has a hard core of loyal supporters. It sells lines of products to satisfy the needs of wide audience through â€Å"specialty shops, firm-sponsored showings, and a few exclusive department stores† (Case Study, n.d.). Another strength is that Sorzal Distributors is an exclusive suppler of South American and African artifacts. Obtaining strong market position, Sorzal Distributors has maintained high-speed growth through product mix and new product lines. The opportunity of the company is the nature of business and loyalty of customers. As it is mentioned: â€Å"consumer tastes are changing from the modern and abstract to the more concrete† like Sorzal’s producrs (Case Study, n.d.). The opportunities of Sorzal include: high potential to growth and profitability of the company; promotion to other divisions; increased revenue from success in national market. In spite opportunities, recent changes threaten the business. Political-legal forces allocate power and provide constraining and protect ­ing laws and regulations. Primarily, political changes in Africa resulted in stricter legislation which prohibits â€Å"exportation of certain artifacts† (Case Study, n.d.). Another threat is increased competition which include the threat of entry by new competitors, the intensity of rivalry among existing competitors, and pressure from substitute products, primarily replicates. Recent years, the number of competitors increased from 5 to 11, and, according to David Olsen, â€Å"bargaining position of Sorzal has eroded† (Case Study, n.d.). The company â€Å"has watched our gross margin slip in recent years due to aggressive competitive bidding by others† (Case Study, n.d.). The weakness of the company is changing economic situation which requires new forms of strategy in order to compete on the limited and narrow market of artifacts. Limited destitution is also a weakness of the company. New Strategy In order to solve these problems and sustain competitive position, Sorzal should accept a competition strategy, instead of a competitive advantage. It is possible to admit that market of artifact is really needed low quality replicates such as produced and sold by Sorzal competitors. Nevertheless, this marketing strategy is not acceptable for Sorzal, which obtains a strong market position as a reputable dealer of   authentic southwestern jewelry and pottery Competition strategy will take place on a price and a non-price basis, and will help Sorzal to compete on the national market. Price competition involves businesses trying to undercut each other’s prices; this will, in turn, be dependent upon their ability to reduce their costs of production. Brand image and loyalty of customers should be the main criteria for Sorzal. This strategy will help to stay on top nationally and sustain competitive position as an exclusive distributor of South American and African artifacts. Marketing strategy based on the non-price competition should take form of branding, advertising, promotion, and additional services to customers (Johnson, Scholes, 1998). An alternative policy for Sorzal is to accept replicates distribution strategy. On the one hand, this strategy will help to add additional sales, but on the other hand, it will have a very negative impact on the company’s reputation. This strategy does not help to compete on the market for a long time, and increase the threat of substitution. The best solution for Sorzal is mass advertising campaign and opening new exclusive stores in order to attracted potential customers.   In relation to minor competitors, Sorzal should provide comparable buyer value but perform the activities more efficiently so as to attain a cost advantage, or perform the activities in a unique way which raises the value to the con ­sumer and thus allows them to command a premium price. If Sorzal follows its present say strategy (as an exclusive distributor of authntic artifacts), it will sustain its dominant position as a top brand, while expanding its operations and becomes a main player in the market. Nevertheless, flexibility is the most important infrastructure requirement, which is essential for the expansion of opportunities, and plays an important role in making and breaking the competitive positioning. References Case Study: Sorzal Distributors. N.d. Available Johnson, G., Scholes, K. Exploring Corporate Strategy. Hemel Hempstead: Prentice Hall. 1998.

Wednesday, November 20, 2019

Discuss the impact of raising minimum wages on minimum wage earners Essay

Discuss the impact of raising minimum wages on minimum wage earners and economy as a whole - Essay Example Increment of minimum wage has been a hotly debated issue not only by economists but also by the non-economist public (Neumark & Adams 6). On this issue, the non-economists have been largely pitted against the economists with the non-economists believing that raising minimum wage benefits employees and prevents employee exploitation by employers. On the other hand, economists are of the opinion that raising minimum wages actually hurt the very employees it is purported to help (Card & Krueger 20). This paper explores the effects of raising minimum wages for both the economy and minimum wage earners. Impacts of Raising Minimum Wages The first reason raising of minimum wages hurts the same people it is intended to help is that increasing these wages and creating laws that set them does not guarantee the public any more jobs. On the contrary, once minimum wages are increased, low-skilled workers are faced with the danger of being thrown out of the job market (Neumark & Adams 26). The rea son for this scenario is that employers will raise the skill requirements and the levels of competencies and experience and align them with the newly increased wages. In other words, employers are not willing to pay more for an employee if he or she does not increase or add value to a product in a manner commensurate with the wage increase (Card & Krueger 20). In the opinion of economists such as David Bradford of Princeton, raising minimum wages is tantamount to asking an employee to look for a job that would guarantee the said minimum wage (Neumark & Adams 15). Otherwise, such an employee may not find any job, depending on his level of skill. According to time-series data from decades of studies, it has been proved that raising minimum wages has the effect of reducing employment (American Enterprise Institute 3). This assertion is true if the rate of job losses in the current economy is anything to go by. According to current job estimates, a 10% increase in minimum wages could tr anslate into a decrease of between 1% and 2% in employment (American Enterprise Institute 4). Especially affected in this regard are young and unskilled workers, especially those from vulnerable and less academically and economically-endowed segments of the population. Besides increasing unemployment and job loss, minimum wage increment, especially the relevant laws, change workers’ systems of compensation. For instance, benefits such as free room and board, subsidized child care, on-the-job training, low-cost insurance, which are essential to low-waged and low-skilled worker compensations, are always negatively affected in cases of minimum wage increments. Employers have the tendency of controlling these benefits after minimum wage increments (American Enterprise Institute 4). In worse scenarios, when laws set minimum wages, some employers change full-time low-paying jobs into part-time high-paying jobs. Regrettably, there is rarely accompanying benefits such as reduced work ing hours. On-the-job training is the other aspect of low-wage employees that suffer reduction due to minimum wage increments (American Enterprise Institute 4). Hence, low-skilled workers lose their chance of improving their skills and opportunities to rise in rank. One benefit of reduced minimum wage, as opposed to increased minimum wage is that many employers prefer hiring unskilled workers and then